GECO OSMOTIC waterproofing

OSMOTIC PENETRATION MORTAR FOR WATERPROOFING SURFACES

GECO OSMOTIC waterproofing is a single-component osmotic penetration mortar that waterproofs concrete and masonry against water under pressure, including negative hydrostatic pressure above 250 kPa. It is the solution for walls wet from the ground side: basements, lift pits, retaining and backfilled walls, tunnels and underground passages.

Conforming to EN 1504-2, it also protects concrete against CO₂ and carbonation, is UV-stable and resists freeze-thaw cycles and the salts and ammonium commonly dissolved in water. Anti-sagging technology makes vertical application easy.

It is applied in two or more 1-2 mm coats 24 h apart (final thickness 3-5 mm), with an alkali-resistant mesh between coats on cracked, uneven or mixed substrates and at wall-floor corners.

NOTE

Resists negative hydrostatic pressure
Total protection against carbonation
Anti-sagging for vertical surfaces
UV-stable and durable

Grey powder; maximum grain size 0.5 mm.
Resistance to negative hydrostatic pressure: > 250 kPa.
CO₂ permeability: Sd > 200 m (requirement > 50 m); water vapour permeability: class I.
Capillary water absorption coefficient: < 0.05 kg/(m²·h⁰·⁵).
Adhesion: > 0.8 MPa; > 0.5 MPa after freeze-thaw, thunder-shower and thermal ageing cycles.
Flexural strength: > 7 MPa; compressive strength: > 25 MPa (28 days).
Thickness per coat: 1-2 mm, 2 or more coats; consumption: 1.55 kg/m² per mm; fresh density: 2050 ± 50 g/dm³.
Mixing water: 5.0-5.5 L per bag; open time: 40 minutes; application between +5 °C and +35 °C.
25 kg bags; pallet of 60 bags; shelf life 12 months in a dry place.

PACKAGING

Waterproofing of tunnels, underground passages, lift shafts, retaining and backfilled walls.
Protection of concrete and cement-based materials against water and CO₂ penetration (EN 1504-2).
On concrete, masonry, plasters, terracotta, brick and stone; repair irregularities first with GECO LIME scratch (masonry) or ECAP® ADP (concrete).

DOWNLOADS