GECO CEMENT plaster

BREATHABLE CEMENT-BASED PLASTER WITH FIBRES AND CIVIL FINISH

GECO CEMENT plaster is a pre-mixed, breathable cement-based plaster with mineral fibres and civil finish, classified as a rehabilitation mortar (EN 998-1 R). It is used to plaster damp walls and ceilings, indoors and outdoors, in one or more coats.

It goes on thick – up to 30 mm per coat – without sagging or cracking: anti-sagging additives keep the surface uniform, mineral fibres improve impact resistance and controlled shrinkage limits fissures. Waterproof (W0) yet vapour-permeable, it keeps treated walls dry and healthy.

After 1.5-2 hours it can be floated to a smooth or slightly rough finish; after 24 hours it can be painted or covered.

NOTE

High thickness per coat
Waterproof and breathable
Fibre-reinforced
Controlled shrinkage

Grey powder; maximum particle size 1.5 mm.
Compressive strength: CS II; adhesion: > 0.6 MPa.
Capillary absorption and water permeability: W0.
Water vapour permeability coefficient μ: ≤ 13.
Thermal conductivity: 0.40 W/mK (declared value).
Reaction to fire: A1.
Thickness per coat: 5-30 mm; yield: 1.35 kg/m² per mm; fresh density: 1670 ± 30 g/dm³.
Mixing water: 4.25-4.75 L per bag; open time: 30 minutes; application between +5 °C and +35 °C.
25 kg bags; pallet of 60 bags; shelf life 12 months in a dry place.

PACKAGING

Plastering of damp walls and ceilings in one or more coats, indoors and outdoors.
Rehabilitation cycles (EN 998-1 R) on concrete, aerated concrete, masonry, plasters, terracotta, brick and stone.
Second coat on the hardened first one for thicknesses over 30 mm.
Machine application: contact the Edilteco Technical Department.

DOWNLOADS